EUROPEAN, SCANDINAVIAN & MISCELLANEOUS NORTH AMERICAN DESIGN

P40 lounge chair designed by Osvaldo Borsani. Steel frame with rubber arms. Upholstered in original Tecno red diagonale wool fabric. A fine example of this iconic design. Manufactured by Tecno, Italy. P.O.A.
P40 lounge chair Osvaldo Borsani for Tecno Photography ©2016 Graham Mancha
view full screen
EJ605 Corona chair designed by Poul M. Volther. Chromed plated flat bar sprung steel frame and 4-star base supporting four graduated elliptical seat and back elements upholstered in brown leather. Original example with early frame configuration. Height 94cm x 88cm wide x 82cm depth. Manufactured by Erik Jørgensen, Denmark. P.O.A.
EJ 605 Corona chair by Poul Volther for Erik Jørgensen Photography ©2016 Graham Mancha
view full screen
FK 6726 'Tulip' armchair designed by Preben Fabricius & Jørgen Kastholm. Fibreglass shell upholstered in black leather with detachable seat cover. This example is fitted with a 5-star swivel base and castors. Manufactured by Alfred Kill, Germany. P.O.A.
FK 6726 Tulip Bird chair by Preben Fabricius & Jørgen Kastholm for Alfred Kill Photography ©2013 Graham Mancha
view full screen
Club armchair designed by Robin Day. Tan leather easy chair supported on a teak underframe. Loose seat and back cushions with button detail. Seat cushion resting on Pirelli webbing platform. First produced in 1962, Day's Club armchair clearly references the earlier 1954 armchair design by Florence Knoll. Manufactured by Hille, London. P.O.A.
Club armchair by Robin Day for Hille Photography ©2015 Graham Mancha
view full screen
Wire Sculpture lounge chair, small 'Diamond', designed by Harry Bertoia. Model 421L. A low back chair formed from wire rods with a sled base. Matt chrome finish. Black fabric cushion. Manufactured by Knoll International. £450 (two available).
Diamond chair by Harry Bertoia 421L Knoll International Photography ©2017 Graham Mancha
view full screen
Tulip side chair designed by Eero Saarinen. Model 151. Cast aluminium swivel base supporting a white fibreglass seat shell. Fabric seat cushion in red or black. Manufactured by Knoll International. P.O.A. (two available).
Tulip chair model 151 by Eero Saarinen. for  Knoll International Photography ©2012 Graham Mancha
view full screen
Plia chair designed by Giancarlo Piretti. Steel frame with a plastic seat and back panel. Frames in red powder coat with transparent seats and backs. Original condition with age-related wear. Manufactured by Castelli, Italy. £90 each (three available).
Plia chairs designed by Giancarlo Piretti for Castelli Photography ©2017 Graham Mancha
view full screen
DSC 106 stacking linking chair designed by Giancarlo Piretti. Moulded plywood seat and back panels with cast aluminium frame and plastic covered steel legs. Brand new. Available to order (upholstered version also available). Manufactured by Castelli, Italy. P.O.A.
Castelli DSC 106 by Giancarlo Piretti Photography ©2010 Graham Mancha
view full screen
Elbow chair. Rosewood frame. Seat upholstered in black leatherette. Illums Bolighus label. Made in Denmark. P.O.A.
Rosewood chair Illums Bolighus Photography ©2010 Graham Mancha
view full screen
Brno armchair designed by Ludwig Mies van der Rohe. Chrome plated tubular steel cantilever frame supporting a sprung seat and back upholstered in white leather. Manufactured by Knoll International. P.O.A. (set of four).
Brno armchairs design Mies van der Rohe made by Knoll International Photography ©2014 Graham Mancha
view full screen
Perch stool designed by Robert Propst. Seat and low back / armrest upholstered in fabric, supported on a dark tone grey stem with height adjustment. Chrome plated foot ring and polished aluminium 4-star base with castors. Manufactured by Herman Miller. P.O.A.
Perch stool by Robert Propst for Herman Miller Photography ©2012 Graham Mancha
view full screen
Pluff folding stool designed by Giancarlo Piretti. Folding frame made of aluminium with transparent polycarbonate glides. Contoured plastic seat in white. 47cm seat height x 56cm overall width x 45cm depth. Manufactured by Castelli, Italy. P.O.A.
Pluff folding stool design by Giancarlo Piretti made by Castelli Photography ©2015 Graham Mancha
view full screen
Span leg table designed by Bruno Mathsson & Piet Hien. Model B431. White laminate top with aluminium edge band and undercut bevel supported on chrome plated detachable 'span' legs. 80cm x 80cm x 70cm high. Manufactured by Fritz Hansen, Denmark. P.O.A.
Span leg table by Bruno Mathsson & Piet Hien. Model B431. Fritz Hansen, Denmark. Photography ©2014 Graham Mancha.
view full screen
Span leg table designed by Bruno Mathsson & Piet Hien. Model B431. Beech laminate top with undercut bevelled edge supported on chrome plated detachable 'span' legs. 80cm x 80cm x 70cm high. Manufactured by Fritz Hansen, Denmark. P.O.A.
Span leg table by Bruno Mathsson & Piet Hien. Model B431. Fritz Hansen, Denmark. Photography ©2007 Graham Mancha.
view full screen
Span leg table designed by Bruno Mathsson & Piet Hien. Model B437. Beech laminate top with undercut bevelled edge supported on chrome plated detachable 'span' legs. 140cm x 80cm x 70cm high. Manufactured by Fritz Hansen, Denmark. P.O.A.
Span leg table by Bruno Mathsson & Piet Hien. Model B437. Fritz Hansen, Denmark. Photography ©2010 Graham Mancha.
view full screen
Mini-desk designed by Franco Albini. Chrome-plated steel frame supporting a white lacquered two-drawer unit. 122cm x 66cm x12mm toughened glass top. Manufactured by Knoll International. P.O.A.
Mini-desk designed by Franco Albini. Chrome-plated steel frame white drawer unit. Manufactured by Knoll International. Photography ©2015 Graham Mancha
view full screen
Tripod table designed by Hans Bellman. Ebonised folding dowel legs with a white laminate top. The Formica top has age-related wear as does the bevelled edge. 58.5cm diameter x 53cm high. Manufactured by Knoll International. P.O.A.
Tripod table designed by Hans Bellman. Knoll International. Photography ©2008 Graham Mancha.
view full screen
Tulip dining table designed by Eero Saarinen. Model 176TR2. Cast aluminium pedestal finished in white supporting a white laminate table top with an undercut bevelled edge. 120cm diameter x 73cm high. Manufactured by Knoll International. £850
Tulip dining table design Eero Saarinen 176TR2  Knoll Photography ©2017 Graham Mancha
view full screen
Tulip coffee table designed by Eero Saarinen. Model 162TR2. Cast aluminium pedestal finished in white supporting a white marble table top with an undercut bevelled edge. Early example. 91cm diameter x 38cm high. Manufactured by Knoll International. P.O.A.
Tulip coffee table design Eero Saarinen 162TR2. marble top Knoll Photography ©2007 Graham Mancha
view full screen



All prices are in UK pounds + vat (where applicable) and shipping.

Methods of payment: Amex / Visa / Mastercard, UK bank cheque, cash, bank transfer and Paypal.

For more details on any of the above items please send me an email.

All items are offered for sale. Some are also available for hire. Please ask for details.


Graham Mancha, October 2017

Tel: +44 (0) 1296 682994

Mobile: +44 (0) 7976 749855

email: graham@mancha.co.uk



  • Design for Modern Living cover page

  • Eames Design

  • Art, lighting & design objects

  • Design reference books

  • Furniture spares & restoration

  • Coming soon


    Send Email/Orders to : graham@mancha.co.uk